Hi, i need to remove the pins from the pictured plug so that i can replace the wiring to one of my sensors.
I have done this in the past (when i first bought the ecu) but am struggling how to remember how i did it.
Have tried with a flattened out piece of wire, paperclip, etc but whatever i do i just cant seem to release the pin.
Thought i'd ask here before i do any more damage in trying.
Thanks

I have done this in the past (when i first bought the ecu) but am struggling how to remember how i did it.
Have tried with a flattened out piece of wire, paperclip, etc but whatever i do i just cant seem to release the pin.
Thought i'd ask here before i do any more damage in trying.
Thanks

Last edited: