Hi there,
Can anybody please assit me with the necessary steps to start off with
to install this alarm system?
I'm making use of hardwired passives to the zone inputs. Thus only my
keypad is on the comms bus, the rest is on the zone inputs 1 to 8. One
passive per zone.
I'm unsure if EOL resistors are needed on the passives, and the
procedure to program the system.
Regards
Johan
Can anybody please assit me with the necessary steps to start off with
to install this alarm system?
I'm making use of hardwired passives to the zone inputs. Thus only my
keypad is on the comms bus, the rest is on the zone inputs 1 to 8. One
passive per zone.
I'm unsure if EOL resistors are needed on the passives, and the
procedure to program the system.
Regards
Johan