Help: FFC Flex Flat Connector to Breadboard?

[[email protected]]

Hello all,

I have an OLED module hanging around that connects via a 30-pin FFC
(Flex Flat Cable, or Flex Film Connector, as many manufacturers call
it) and I'd love to experiment with it before doing any PCB work.

Does anyone know of a connector (I need both 10-pin and 30-pin) that
allows me to plug this onto a solderless breadboard?

Many many thanks for any answers,

Hugo

 

[Charles Jean]

Hello all,

I have an OLED module hanging around that connects via a 30-pin FFC
(Flex Flat Cable, or Flex Film Connector, as many manufacturers call
it) and I'd love to experiment with it before doing any PCB work.

Does anyone know of a connector (I need both 10-pin and 30-pin) that
allows me to plug this onto a solderless breadboard?

Many many thanks for any answers,

Hugo

___
I have used wire-wrap headers to do this. Wire wrap end goes into the
solderless breadboard(tight fit), flex ribbon cable end goes onto the
header post side. I seem to have lost my part number/supplier for it,
however. If you find one and it works, please post that info. Thanks

Quidquid latine dictum sit, altum viditur.
(Whatever is said in Latin sounds profound.)