Sadlercomfort
Ash
I'm trying to make a circuit to power a CCFL back-light from an old LCD monitor. I'm using the old transformer from the LCD monitor as well.
However the schematic I've been referring to shows the transformer with 5 pins on the primary side, but the one I have recycled has 7 pins on the primary? Please see attached for the schematic, and the transformer i'm trying to use.
I can't find a schematic which shows 7 pins on the primary side of the transformer, and was hoping someone could tell me how to change the schematic to incorporate 7 pins. Also the ccfl lamp I'm using shows 30W on the wires, so i dont know whether this schematic is suitable.
I'm not too savy in electronics, just finished learning all the basics so can identify almost every type of component. Appreciate your time.
Ashley,
However the schematic I've been referring to shows the transformer with 5 pins on the primary side, but the one I have recycled has 7 pins on the primary? Please see attached for the schematic, and the transformer i'm trying to use.
I can't find a schematic which shows 7 pins on the primary side of the transformer, and was hoping someone could tell me how to change the schematic to incorporate 7 pins. Also the ccfl lamp I'm using shows 30W on the wires, so i dont know whether this schematic is suitable.
I'm not too savy in electronics, just finished learning all the basics so can identify almost every type of component. Appreciate your time.
Ashley,