Hello, a while ago I started to build a cnc machine out of cd drives. My goal for this project is to have two h bridges contoling my 2 bipolar steppers all controlled via db25 serial port. My questions are;
1.) what h bridges do I use and how do I wire them to the motors
2.) how do I wire the h bridges to the db25 and what program do I use. (I already have turbo cnc so I you could make that work that would be nice)
1.) what h bridges do I use and how do I wire them to the motors
2.) how do I wire the h bridges to the db25 and what program do I use. (I already have turbo cnc so I you could make that work that would be nice)
