G
Greg
Hi,
Does anyone from this group know whether it is possible to adjust the mains
output voltage range on a Exendis, Gridfit 250 inverter?
I am putting together a small (~200W) grid-tie demonstration system in the
UK, but have discovered the inverter is specified for European 207 - 241.5v
mains voltages only. In the UK the mains voltage, although nominally 230v,
can rise as high as 253v. Unless I am drawing significant loads from the
mains, the inverter detects UK mains as an over-voltage condition and shuts
down.
Many thanks,
Greg.
Does anyone from this group know whether it is possible to adjust the mains
output voltage range on a Exendis, Gridfit 250 inverter?
I am putting together a small (~200W) grid-tie demonstration system in the
UK, but have discovered the inverter is specified for European 207 - 241.5v
mains voltages only. In the UK the mains voltage, although nominally 230v,
can rise as high as 253v. Unless I am drawing significant loads from the
mains, the inverter detects UK mains as an over-voltage condition and shuts
down.
Many thanks,
Greg.
