P
Paul Burridge
Hi all,
Just tried to verify the value of a resistor that was marked 330k and
the DVM wouldn't give a stable reading. Tried a spare DVM and the same
thing happened. No problems with lower value resistors, but why should
I get floating readings with anything in this higher range? I think
it's unlikely that both meters are faulty.
Just tried to verify the value of a resistor that was marked 330k and
the DVM wouldn't give a stable reading. Tried a spare DVM and the same
thing happened. No problems with lower value resistors, but why should
I get floating readings with anything in this higher range? I think
it's unlikely that both meters are faulty.