Footprint - Relay and button on Altium Designer

[Aline]

Hello
I'm doing a project, however, I need the footprint of a different button of the I have in the Altium library, and a relay too.
I need to use HLS8l-DC12V-SC relay and a 4-pin push button.
I'd appreciate if someone could provide me the footprint of these components, I've just started using Altium and I have no experience creating libraries. Also, I need these components urgently.
Thanks in advance.

 

[Old Steve]

You'll be extremely lucky to get the footprint of the relay, and you haven't even mentioned dimensions or part number for the 4-pin pushbutton, so you have no chance there.
Perhaps you should quickly read up on creating component footprints in Altium Studio in the manual. It can't be that hard, and you have to learn sooner or later. You'll come across this problem all the time.
(If you'd started reading that part of the manual at the same time you posted here, you'd have already done it by now.)

 

[Kiwi]

Looks like you are experiencing your second childhood Steve.

 

[Old Steve]

Looks like you are experiencing your second childhood Steve.

Childhood??? That's a current pic of me.

Edit: Oops, you did say 'second', so yep.