Hi
Just got a Fluke 89iv Multimeter from ebay. It is in very good condition but I am wondering if it IS 100% OK. I understand I should not get a reading when I short the cables but I am getting these readings
AC V 0-1000= 0.0027 . Wires not touching 0.0140
AC V 0mV- 1500mv= 00.17 Wires not touching does not fully settle wanders around 5.900
DV V 0-1000 V = 0.0000 Wires not touching 0.0000
DC 0mV-3000mV = 0.16 Wires not touching does not fully settle wanders around 0.049
Resistance 0- 3000 OHM = 0.13
Is this normal and acceptable. Are there any other test I can do.
Apologies if this is very silly question.
Thanks for your help.
Lou
Just got a Fluke 89iv Multimeter from ebay. It is in very good condition but I am wondering if it IS 100% OK. I understand I should not get a reading when I short the cables but I am getting these readings
AC V 0-1000= 0.0027 . Wires not touching 0.0140
AC V 0mV- 1500mv= 00.17 Wires not touching does not fully settle wanders around 5.900
DV V 0-1000 V = 0.0000 Wires not touching 0.0000
DC 0mV-3000mV = 0.16 Wires not touching does not fully settle wanders around 0.049
Resistance 0- 3000 OHM = 0.13
Is this normal and acceptable. Are there any other test I can do.
Apologies if this is very silly question.
Thanks for your help.
Lou