Maker Pro
Maker Pro

finding 4 pin connectors for own wires

Hi Everyone,

I am searching for 4 pin connectors both male and female to which I can add my own wires.

There are jst connectors available but they already come with attached wires.

Is there any such connector available.

Power supply rating 12v 5 amp.

thanks
 
If you have access to scrapped computers, you should be able to grab some 4pin power connectors from mainboard and the PSU should have the plug that fits.
 
Just gooooogle for "Molex" connectors, just like the ones that were used for powering hard drives..... :)
 
Top