Hello everyone, i generated 3 different frequency sinusoids and summed them with wien bridge oscillators.1 represents 'on' for a wave 0 represents 'off'.I need to see 0 Volts at the output if and only if 101 and 000 situations.Otherwise(111 110 011 010 100 001) i should observe combination of sinusoids at the output.I tried to connect a bandpass filter to the end of summing amplifier.However, in this case i see nothing at the output for 100 and 001 cases.Thanks for your help.
-
Categories
-
Platforms
-
Content