P
proguard
I' ve got an old Paradox Esprit 728 v 1.0 default and installed in one
of my clients house.
It is monitored also from my ARC and untill yesterday all the previous
3 years works fine.
Now we monitor alarm signals from zone 4 (first) and second from zone
1. Z4 is a PIR and Z1 is an aleph m.c. in the entrance door. All the
alarms came from Z4,Z1 with this sequence.
I don't know what causes the alarm but the motion detector is just
fine, the same the m.c.
I believe it must has to do with the resistor for the zone doubling. I
use common resistors from the market and not those provided by
Paradox....
Anyone idea what cause this alarm?!?! (Z4, Z1)
Thanks in advance!
Spyros Kintzonides
Greece
of my clients house.
It is monitored also from my ARC and untill yesterday all the previous
3 years works fine.
Now we monitor alarm signals from zone 4 (first) and second from zone
1. Z4 is a PIR and Z1 is an aleph m.c. in the entrance door. All the
alarms came from Z4,Z1 with this sequence.
I don't know what causes the alarm but the motion detector is just
fine, the same the m.c.
I believe it must has to do with the resistor for the zone doubling. I
use common resistors from the market and not those provided by
Paradox....
Anyone idea what cause this alarm?!?! (Z4, Z1)
Thanks in advance!
Spyros Kintzonides
Greece
