Maker Pro
Maker Pro

erasing eproms without UV box

T

Thrashbarg

can this be done? I know you can put them in the sun for about two weeks,
but that's a little long. I was thinking perhaps a black light can do it,
eventually.
 
F

Form@C

can this be done? I know you can put them in the sun for about two weeks,
but that's a little long. I was thinking perhaps a black light can do it,
eventually.

I'm not sure about that. "Germicidal" UV tubes are short wavelength and
usually work, but I think "black light" is at the wrong end of the UV
spectrum to be of any use.
 
J

JeffM

perhaps a black light can do it, eventually.
Thrashbarg

365nm black lights won't do it.
You need a 254nm source of sufficient intensity.
Radiation of this wavelength is not good for humans.
That is why EPROMS are inside an enclosure when being erased.

in the sun

Maybe with a lens and a visible light filter.
 
N

nemo

JeffM said:
365nm black lights won't do it.
You need a 254nm source of sufficient intensity.
Radiation of this wavelength is not good for humans.
That is why EPROMS are inside an enclosure when being erased.



Maybe with a lens and a visible light filter.

Bit of an understatement. The wavelength of UV used to erase EPROMS is
murder to the eyes.

To build an eraser on a shoestring, the best thing to do is to buy a
replacement lamp c/w data sheet from someone like RS Components and design
and build your own power supply for it, and of course a totally lightproof
enclosure

Hope this helps.

Nemo
(Engineer and qualified Health and Safety rep.)
 
U

UncleWobbly

yep... found this out for myself when erasing PICs... spent a whole night
under a blacklight and the program was still perfectlty intact the next
morning :eek:)

I have heard you can erase in strong sunlight - but not thru a window as
most glass will block UVC

while on the subject, don't be tempted to have an un-enclosed UVC tube
switched on.. I did and even though it wasn't in direct line of sight, it
was off to one side, the next day my eyes hurt like hell - I had given
myself arc-eye!!! felt like sand in there for a day or two... still, learnt
my lesson :eek:)
 
Top