M
Mike
the projector had a bad lamp, and i replaced the lamp. it worked ok until
now. 30 hours later.
it turns on, shows a picture from the inputs, but the problem is when you
turn it on
the green LED blinks like i tnormally does, but 15 seconds later. the lamp
shuts off, fans kick on high speed, and the red light will blink on 1 second
intervals. almost like a bad lamp or something. lamp is new. i dunno whats
up.
i took the lamp out and stuck it my boxlight cage, works fine. :-\
any ideas?
now. 30 hours later.
it turns on, shows a picture from the inputs, but the problem is when you
turn it on
the green LED blinks like i tnormally does, but 15 seconds later. the lamp
shuts off, fans kick on high speed, and the red light will blink on 1 second
intervals. almost like a bad lamp or something. lamp is new. i dunno whats
up.
i took the lamp out and stuck it my boxlight cage, works fine. :-\
any ideas?
