S
Sam Goldwasser
This dual trace scope was working 15 or 20 years ago and has sat ever since.
So, the CRT is good. I powered it up recently but there was no trace though
I think I was able to get something on the screen. But no guarantees other
than that it's in decent condition.
Includes manual with schematics.
If you'd like a fun challenge, this is for you. If on the other hand
you just want a working scope, go to eBay, since you'll probably need
a working scope to make this one work.
Best offer under $25 + shipping takes it. Else, it goes in the garage,
which is one step from the trash.
Thanks!
--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html
Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
So, the CRT is good. I powered it up recently but there was no trace though
I think I was able to get something on the screen. But no guarantees other
than that it's in decent condition.
Includes manual with schematics.
If you'd like a fun challenge, this is for you. If on the other hand
you just want a working scope, go to eBay, since you'll probably need
a working scope to make this one work.
Best offer under $25 + shipping takes it. Else, it goes in the garage,
which is one step from the trash.
Thanks!
--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html
Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
