Robert said:
I think i have almost all of the Gerber files for making a double-sided
PCB that has parts on both sides.
But, as i vaguely remember, there are some companion files:
Pick-and-Place that give part designations like R1..R23 1K2 1/8W IRC
film etc, part placement like R1 Xnn Ynn C23 Xnn Ynn etc .
I think there were three.
How can i generate those?
Thanks.
Found the missing file types i need to generate.
Made a sample to show what i need to make:
Pick & Place generated by WinBoard V2.10 Date Created: 7/1/2006
Components Pick & Place Report File: G
CB.PIK
SMT components on the component side
File: PCB.pk1
Component Count
--------------------
MMDT2222A-7-F 39
CRCW06030000Z0EA 1
VJ0603A181JXBAC 1
Adhesive locations on the component side
File: PCB.pk2
* * * * * *
Pick & Place generated by WinBoard V2.10 Date Created: 7/1/2006
SMT Components (Component Side) Report File: PCB.pk1 (partial, sample)
Q1 MMDT2222A-7-F 0.1206 0.2376 0.00
Q2 MMDT2222A-7-F 0.2456 0.2376 0.00
Q3 MMDT2222A-7-F 0.3474 0.2376 0.00
Q4 MMDT2222A-7-F 0.4806 0.2376 0.00 (etc)
J1 CRCW06030000Z0EA 2.2344 0.0335 0.00
C1 VJ0603A181JXBAC 1.2345 0.4015 0.00
* * * * * *
Pick & Place generated by WinBoard V2.10 Date Created: 7/1/2006
Adhesive (Component Side) Report File: PCB.pk2 (partial, sample)
0.1206 0.2376 0.0394
0.2456 0.2376 0.0394
0.3474 0.2376 0.0394
0.4806 0.2376 0.0394 (etc)
2.2344 0.0335 0.0125 (faked)
1.2345 0.4015 0.0125 (faked)
* * * * * *
BOM generated by WinBoard V2.10 Date Created: 7/1/2006
Bill Of Material Report File: PCB.BOM (partial, sample)
Count Component Type Module Type Component Reference
----- ---------------- --------------- ---------------------
1 CRCW06030000Z0EA 0603 J1
39 MMDT2222A-7-F SOT-363 Q1 Q2 Q3 Q4
(etc)
1 VJ0603A181JXBAC 0603 C1