P
PJS7
I have a problem with a DSC Power 632 communicator. When the communicator
kicks in to send an alarm code to the central station, the dial tone
continues, although in a somewhat deminished way. After a while the
automated voice of the phone company comes on with the message "... hang up
and dial again". The signal gets through to the central station all right,
but the phone line is restored to full dial tone only after abaut two
minutes when the phone company hangs up.
Two additional points: this is a DSL/ voice line; I put a filter in front of
the phone line entering the panel; also the phone line has 'call waiting' I
put a *70 (B70) in the string between the D and the phone number.
Any ideas as to what I am missing? Thanks.
kicks in to send an alarm code to the central station, the dial tone
continues, although in a somewhat deminished way. After a while the
automated voice of the phone company comes on with the message "... hang up
and dial again". The signal gets through to the central station all right,
but the phone line is restored to full dial tone only after abaut two
minutes when the phone company hangs up.
Two additional points: this is a DSL/ voice line; I put a filter in front of
the phone line entering the panel; also the phone line has 'call waiting' I
put a *70 (B70) in the string between the D and the phone number.
Any ideas as to what I am missing? Thanks.