C
Crumb
Hello;
I harvested some nice flat double bobbin transformers from a power
supply. These are 32 VRMS and about 6" x 5" x 2.5" in size. There was
two transformers in the supply and it was fused at 125VAC @ 5 amps
(2.5 amps per tranny).
I would asume that the current capability was over spec'ed and fusing
at only 2.5 amps @ 125 VRMS per transformer is again, lower than the
actual VA of the transformer.
Is there a way to determine the current capability of these?
Thanks
I harvested some nice flat double bobbin transformers from a power
supply. These are 32 VRMS and about 6" x 5" x 2.5" in size. There was
two transformers in the supply and it was fused at 125VAC @ 5 amps
(2.5 amps per tranny).
I would asume that the current capability was over spec'ed and fusing
at only 2.5 amps @ 125 VRMS per transformer is again, lower than the
actual VA of the transformer.
Is there a way to determine the current capability of these?
Thanks