So, I'm using EasyEDA to build an SSOP20 -> DIP20 and SSOP30-> DIP30 adapter boards. The ones on eBay aren't quite designed right from what I can gather. The SSOP20 ones I think would work, but not sure. And there are no SSOP30->DIP30 boards.
I want to make clear that I'm creating these PCB adapter boards so that I can plug the TI chips into a breadboard.
So, my big question is, can someone look over these files and verify I have them properly to scale and put together correctly?
Here's the Datasheet for the two chips:
http://www.ti.com/lit/ds/symlink/bq76940.pdf
http://www.ti.com/lit/ds/symlink/bq78350-r1.pdf
And Gerber/SVG files:
https://drive.google.com/drive/folders/1RfmBp-aw6GGOihCcTLQI4TF-DT1vP0XD?usp=sharing
Thanks for any assistance. Trying to learn this stuff
I want to make clear that I'm creating these PCB adapter boards so that I can plug the TI chips into a breadboard.
So, my big question is, can someone look over these files and verify I have them properly to scale and put together correctly?
Here's the Datasheet for the two chips:
http://www.ti.com/lit/ds/symlink/bq76940.pdf
http://www.ti.com/lit/ds/symlink/bq78350-r1.pdf
And Gerber/SVG files:
https://drive.google.com/drive/folders/1RfmBp-aw6GGOihCcTLQI4TF-DT1vP0XD?usp=sharing
Thanks for any assistance. Trying to learn this stuff
