Maker Pro
Maker Pro

CTX EX951F monitor

The light next to the button comes on like normal and the monitor hums
as it powers up. But there is no image there. I read one tip that said
replace C125. But I don't know what that is. So, if you can help on my
clueless question, it would be much appreciated.

Thanks,

Jim
 
K

Kirk S.

Jim,

C125 is the part number of a capacitor on the monitor chassis. I don't see
that in the parts list though. You can find a service manual on the
internet.

Be aware that deadly voltages exist inside a monitor chassis. Electronics
repair can be a fun and rewarding pasttime however a large dose of caution
is advised. Check out the repair faq (www.repairfaq.org) for general tips
on safety tips, diagnosis and repair.

Good luck and be carefull...

Kirk S.
 
Top