Maker Pro
Maker Pro

converting PAL>NTSC Composite signal using common componants

P

Peter Murray

Hi there,
I need to convert a PAL composite signal to NTSC. but I dont have access
to many component suppliers, mainly radioshag :p

any idea?
 
M

Mjolinor

Peter Murray said:
Hi there,
I need to convert a PAL composite signal to NTSC. but I dont have access
to many component suppliers, mainly radioshag :p

any idea?

This is not a trivial undertaking and very difficult to do at the component
level. The easiest thing to do is to replace the NTSC device that you are
trying to drive with a new one, most things are multi standard nowadays.
Failing that then a video card and PC will do a reasonable job if you have
them handy. A custom built converter of reasonable quality will cost you
about $150.
 
Top