Connecting double-input logic gates on breadboard

[Brunohid]

I'm creating a half-adder with transistors (no chips), switches, resistors, and jumper wires. To make the XOR gate I am connecting OR, NAND, and AND gates together. Individually I can make each of them and light an LED etc. but I don't know how to connect these gates between each other.

 

[(*steve*)]

wires are the obvious solution, however it would be useful to see your schematics. It is possible that the output voltage levels are not compatible with the input voltage levels.

 

[Brunohid]

wires are the obvious solution, however it would be useful to see your schematics. It is possible that the output voltage levels are not compatible with the input voltage levels.

I am using wires and I know where they go for the second gate but I don't know where to connect them for the first gate (where the input of the second gate would be coming from).

 

[(*steve*)]

show us your schematics and the arrangement of gates you are trying to achieve.

 

[Brunohid]

show us your schematics and the arrangement of gates you are trying to achieve.

I figured it out,
Thank you.