Maker Pro
Maker Pro

Come Cross Test Circuit Theory in Simulation, Over Unity Circuit

  • Thread starter The Flavored Coffee Guy
  • Start date
T

The Flavored Coffee Guy

Shit, I bet any one of you sat and argued as much with your
instructors in class. The first three component pissed you off and
did work. 3 transformers and 3 capacitors are just too fucking hard
to pick up. If you did, you wouldn't be here arguing.
 
T

The Flavored Coffee Guy

If I were a woman, I would think were all fat and lazy. Because, my
ultra fine ass, with my perfect breasts have seen this circuit, and
you can't have any. Cause your fat.
 
C

Chuck Harris

The said:
Shit, I bet any one of you sat and argued as much with your
instructors in class. The first three component pissed you off and
did work. 3 transformers and 3 capacitors are just too fucking hard
to pick up. If you did, you wouldn't be here arguing.

Try quoting the article you are responding to. Most don't read this
usenet group on google groups.

I have done the experiment. This is freshman engineering stuff. What you
are observing is reactive current. It is 90 degrees out of phase with the
voltage. This is clearly shown on the LTSpice simulation.

Power = Voltage x Current

and in this case is precisely zero unless you are using lossless components.

If you try to draw real power from it, it becomes real current, and quickly
drops. You cannot draw more power from this circuit than you put into it.
Less, actually because of real losses in the inductors, wires and capacitors.

Would it help you any if I told you that even Tesla understood this?

Make the prototype, create power from nothing and prove me wrong.
I'll make you richer than Bill Gates, and Warren Buffet combined... unless
you have something against being rich.

-Chuck
 
J

Jim Thompson

Shit, I bet any one of you sat and argued as much with your
instructors in class. The first three component pissed you off and
did work. 3 transformers and 3 capacitors are just too fucking hard
to pick up. If you did, you wouldn't be here arguing.

You are an ignoramus. Go home and tell your mother that she should
have aborted you ;-)

PLONK

...Jim Thompson
 
Top