Cheap EPROM programmer for 29F020 chips ?

[127.0.0.1]

X-No-Archive: yes

Im looking for a cheap programmer to program the 29F020 flash eproms - in
the UK.

Does anyone know of any ?

 

[Alien Zord]

Im looking for a cheap programmer to program the 29F020 flash eproms - in
the UK.

Does anyone know of any ?

http://www.artbv.nl/products/programmers/index.htm

I've had the EPP-2 (serial i/f), since 1998 and it served me well (was given
it for nothing). It was available then from Maplin but I have no idea of
their current UK peddlers.

 

[Gary Tait]

X-No-Archive: yes

Im looking for a cheap programmer to program the 29F020 flash eproms - in
the UK.

Does anyone know of any ?

Build or buy?

Will you consider a costlier, harder to find, but pin compatible that
can be programmed with a simple circuit?

Do you already have a device with a 29F040 chip with on-board
upgrade/programming facilites?

 

[127.0.0.1]

X-No-Archive: yes

Buy, im too lazy

I dont have any device.. I tried to program one of the chips in an older
motherboard
but it seems not all the address lines are connected as it only programmed
128KB.

I thought I might as well buy a programmer for a few bob but cant seem to
find any
less than £500.

 

[Bubba Jones]

Eprom Programmer 4 -
http://www.progshop.com/shop/programmer/index.shtml

or you can build it your self from schematics

http://www.batronix.com/electronic/circuits/eeprommer.shtml