Can anyone point me in the direction of high amperage 5 volt power supplies?

[Coleston]

Say power factor corrected and 10 amps capability.

Also, any pointers on how to adjust power supply voltage and current
independantly with a microcontroller would be helpfull, I know atmel
and pic very well, so anything in those assemblers would be ideal.

Thanks.

-Coleston

 

[Phil Allison]

** Groper alert !

Say power factor corrected and 10 amps capability.

** A 50 watt PSU does not need PFC.

Total wank.

Also, any pointers on how to adjust power supply voltage and current
independantly

** Not even possible.

If you adjust the voltage - the load determines the current flow.

If you adjust the current LIMIT - the load will determine the voltage.

with a microcontroller would be helpfull, I know atmel
and pic very well, so anything in those assemblers would be ideal.

** Some Lab DC Supplies have remote control of output voltage and current
limiting by a 0-10 volts signal.

Use Google to locate them.

Won't be cheap.



.......... Phil