B&G wirings

[PeppeC]

I have an autopilot Raymarine ST4000+ installed on my sail boat and a B&G
Network for speed and wind direction. I'm trying to send the NMEA data from
B&G to the ST4000. On the B&G instrument the output is a simple five holes
DIN connector. I've searched around for the wirings of this plug but it
seems the best kept secret (or I'm getting too old for this stuff).

Where could I find the description of the plug (without having to bring an
oscilloscope in the cockpit)?

Many thanks
Giuseppe

 

[Dennis Pogson]

I have an autopilot Raymarine ST4000+ installed on my sail boat and a
B&G Network for speed and wind direction. I'm trying to send the NMEA
data from B&G to the ST4000. On the B&G instrument the output is a
simple five holes DIN connector. I've searched around for the wirings
of this plug but it seems the best kept secret (or I'm getting too
old for this stuff).

Where could I find the description of the plug (without having to
bring an oscilloscope in the cockpit)?

Many thanks
Giuseppe

Try [email protected] or ring 954-229-0208. They should be able to help
you.

 

[[email protected]]

You can probably find it or infer it from some of the diagrams at :

http://www.bandg.co.uk/pdfs/