Maker Pro
Maker Pro

antenna question (Linx 1/4 wave whip vs 1/4 wave stiff wire)

M

Mook Johnson

I'm looking at using a Linx Technologies LR (433Mz) or ES (900MHz) chipset
for makeing an RF link with ~500 ft open field range. Linx sells 1/4 wave
monopol whip antennas but they are a bit bulky and stout for my purposes. I
need something more flexable and flensey.

Could I use something like stiff wire cut the the 1/4 wavelength and achieve
similar performance as their whips?

I'm guessing the answer is yes but wanted to bounce it off of you guys.
 
J

Jan Panteltje

I'm looking at using a Linx Technologies LR (433Mz) or ES (900MHz) chipset
for makeing an RF link with ~500 ft open field range. Linx sells 1/4 wave
monopol whip antennas but they are a bit bulky and stout for my purposes. I
need something more flexable and flensey.

Could I use something like stiff wire cut the the 1/4 wavelength and achieve
similar performance as their whips?

I'm guessing the answer is yes but wanted to bounce it off of you guys.

Works OK here with 1/4 with a different module and mosfet output stage.
To do it perfectly would require you to measure SWR somehow.
 
Top