Maker Pro
Maker Pro

Annoying noise interference

B

Backhander

I've just set up a newly purchased pair of Technics 1210's and
Behringer VMX200 mixer. I've connected the mixer to my Sony Hi F
with a cable measuring about 2.5 metres. My speakers are about 0.5
1m away from my decks. It all works but there is an annoying level o
interference. This interference manifests itself in a buzzing soun
and an occasional electrical crackling sound (it reminds me of th
sound my cheap electric guitar amp used to make). I expected
slight sound but nothing like this. Loud music drowns it out bu
slightly more subdued tunes are ruined by this annoying interference
There's not much point in having the enhanced quality of a viny
recording if there's a constant buzz in the background

Any suggestions? Could there be a fault in my decks? My mixer? Th
cables? I've seen all these specially insulated cables with gol
connectors but certain sources have told me that these don't make a
awful lot of difference
 
P

Pooh Bear

Backhander said:
I've just set up a newly purchased pair of Technics 1210's and a
Behringer VMX200 mixer. I've connected the mixer to my Sony Hi Fi
with a cable measuring about 2.5 metres. My speakers are about 0.5 -
1m away from my decks. It all works but there is an annoying level of
interference. This interference manifests itself in a buzzing sound
and an occasional electrical crackling sound (it reminds me of the
sound my cheap electric guitar amp used to make). I expected a
slight sound but nothing like this. Loud music drowns it out but
slightly more subdued tunes are ruined by this annoying interference!
There's not much point in having the enhanced quality of a vinyl
recording if there's a constant buzz in the background.

Any suggestions? Could there be a fault in my decks? My mixer? The
cables? I've seen all these specially insulated cables with gold
connectors but certain sources have told me that these don't make an
awful lot of difference.

Specialty cables will indeed make *no* difference.

I can't imagine what this noise sounds like. Why not post it as a wav file
on a binaries group ?

Graham
 
Top