Alarm timeout on my DSC PC1555 question

[[email protected]]

Hi guys
A quick one for you
I reset my PC1555 to default and entered the following code
*8 555
001
01
05
05
01
01
00
00
00
005
030
045
060
004
006
2222
007
0545
015
7
#
380
1
#
##

I would like to know after how many minute/seconds the alarm will stop
(cut off) if I'm not home. Is it included in my code or there is a
default value?
If there is nothing defined, can any one of you tell my the sequence to
have a 5 minutes cut off.

thanks

 

[shady]

Looks like you have it set for 4 minutes.

005 - section #
030 - entry delay 1
045 - entry delay 2
060 - exit delay
004 - bell timeout

A manual would probably come in handy.

 

[Frank Olson]

Hi guys
A quick one for you
I reset my PC1555 to default and entered the following code
*8 555

<snip> If you did that, you'd be "nowhere". The 1555 requires a four
digit installers code.

 

[[email protected]]

Thanks
Yup I should try to get the manual
I typed *8 5555

I thought 004 was the code to set the bell timeout, so I thought I had
6 minutes ,,, thanks for your input
005
030
045
060
004
006

 

[shady]

http://www.panelguides.com/index.ph...3&func=fileinfo&parent=category&filecatid=417

enjoy