Ademco Vista-15P and X10

[Ray]

I'd like to program my Vista-15P to send X10 commands. I've read that
I can either use a 4300/1321X10 transformer or a PSC04 which I don't
have. I understand that the PSC04 and PL513 are one way interfaces
that send only. However, I do have a spare PSC05 and a TW523 that are
two way interfaces that send and receive. My question is, can either
the PSC05 or TW523 be used in place of the PSC04?

Thanks
Ray

 

[Mark Leuck]

I'd like to program my Vista-15P to send X10 commands. I've read that
I can either use a 4300/1321X10 transformer or a PSC04 which I don't
have. I understand that the PSC04 and PL513 are one way interfaces
that send only. However, I do have a spare PSC05 and a TW523 that are
two way interfaces that send and receive. My question is, can either
the PSC05 or TW523 be used in place of the PSC04?

Thanks
Ray

Use the 4300/1321 transformer, the 15P doesn't support a PSC04 that I know
of

 

[Ray]

Just reread the installation manual and it indicates that the
Vista-15P series does support the PSC04 as well as the x-formers.

Ray

I'd like to program my Vista-15P to send X10 commands. I've read that
I can either use a 4300/1321X10 transformer or a PSC04 which I don't
have. I understand that the PSC04 and PL513 are one way interfaces
that send only. However, I do have a spare PSC05 and a TW523 that are
two way interfaces that send and receive. My question is, can either
the PSC05 or TW523 be used in place of the PSC04?

Thanks
Ray

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.8 for non-commercial use <http://www.pgp.com>

iQCVAwUBP3Y4Nj3Lbepk7MjjAQH4rAP/Vu34kSYDhNAlz6PYseM8HHtwrMz9paUz
o6Ihavwvf5gzbefBlP2unnjqD2ogAcL2wfDOIv8O8bHEYz0wvc95f2NRNXGYQQUX
qL2CHppFeMdJZ+ofqlQa8U5tQm1/7DA8KEIY0/JD1o39uiesKeS0gVra+DZdtaws
L1qohfmMW/U=
=IbQN
-----END PGP SIGNATURE-----

 

[Mark Leuck]

Yup your right, I've always used the transformers