Maker Pro
Maker Pro

a problem with 2sk1271 for the electronics masters of the web

Y

yar

hi all
hello every one I have a board drive a vibrator . The vibrator is a
coil and bars .The output of the board is from 60 Hz to 300Hz(adjusted
with VR)with about 250 volt feeding to the vibrator.The board
including 2power MOS FET (2sk1271)it's maximum operating voltage 1400
volt from the data sheet . I can't find the (2sk1271)or any
replacement but I find another mos fet it has maximum operating
voltage 900 volt and I don't know what I can do with this problem? is
there any solution


thank you very much

yar
 
Top