Anybody who knows how a 7S125 (tri-state buffer) will behave when the ENABLE (pin 1 on a SOT23) input goes from high to low very slowly, in the order of several milliseconds to go all the way from high to low?
Can it occur that the output (pin 4 on a SOT23) takes on low or high for a short moment during the change, independently upon the input (pin 2 on a SOT23)?
Same question for slow low to high.
/SC
Can it occur that the output (pin 4 on a SOT23) takes on low or high for a short moment during the change, independently upon the input (pin 2 on a SOT23)?
Same question for slow low to high.
/SC
