I'm working as reverse eng. using altium summer 08
after placing commponends
to define nets you can
1.make schematic and wire and update them to pcb
or
2.on pcb editor after placing components it's possible to change,add or remove nets
using design -> netlist -> edit nets
but both of them need too much time
you can get report of nets like below by
design -> netlist -> export netlist from pcb
[
H1
HDR1X4H
HEADER
]
[
D1
DO-41
DIODE
]
[
C1
RAD-0.3
CAP
]
[
R1
AXIAL-0.3
RES
]
(
NET4
R1-2
C1-2
D1-2
H1-4
)
(
NET3
H1-3
D1-1
)
(
NET2
H1-2
C1-1
)
(
NET1
H1-1
R1-1
)
the quastion is :
is there any way able us to type nets like or similar to upper text.
and define my nets to the altium by that text.
I realy need answer immediatly.
have a nice time
.
after placing commponends
to define nets you can
1.make schematic and wire and update them to pcb
or
2.on pcb editor after placing components it's possible to change,add or remove nets
using design -> netlist -> edit nets
but both of them need too much time
you can get report of nets like below by
design -> netlist -> export netlist from pcb
[
H1
HDR1X4H
HEADER
]
[
D1
DO-41
DIODE
]
[
C1
RAD-0.3
CAP
]
[
R1
AXIAL-0.3
RES
]
(
NET4
R1-2
C1-2
D1-2
H1-4
)
(
NET3
H1-3
D1-1
)
(
NET2
H1-2
C1-1
)
(
NET1
H1-1
R1-1
)
the quastion is :
is there any way able us to type nets like or similar to upper text.
and define my nets to the altium by that text.
I realy need answer immediatly.
have a nice time
.